Optiview TRKPTZ-18NX Manual do Utilizador descarregar pdf (Página 28)

Auto Zooming Tracking Dome Camera User Manual

PROPORTIONAL PAN:

Proportional pan automatically reduces or increases the pan

and tilt speeds in proportion to the zooming times. At telephoto

zoom settings, the pan and tilt speeds will be slower for a given

amount of joystick deflection then at wide zoom settings. This

keeps the image from moving too fast on the monitor when there

is a large amount of zoom.

There are two proportional pan modes:

ON (default): Enables the proportional pan mode.

OFF: Disables proportional pan mode. The pan speed will

not depend on the zooming times.

PARK TIME:

This feature enables the dome to operate a specified activity

(scan, preset, or pattern) after a programmed time of idleness.

Park time can be programmed from 1 minute to 720

minutes (12 hours), or set to zero, which disables this feature.

The default setting is zero.

PARK ACTION:

This feature will define the activity when the dome parks.

The following settings are available:

NONE (default): No action.

AUTO SCAN: Dome starts auto scan operation.

RANDOM SCAN: Dome starts frame scan operation.

FRAME SCAN: Dome starts frame scan operation.

PRESET 1: Dome goes to preset 1.

PRESET 8: Dome goes to preset 8.

PANTTERN 1: Dome runs pattern1.

PANTTERN 2: Dome runs pattern2.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 52 53

Sem comentários

Optiview TRKPTZ-18NX Manual do Utilizador Página 28